#BOSCH MICROWAVE TROUBLESHOOTING HOW TO USE YOUR#
#BOSCH MICROWAVE TROUBLESHOOTING SERIES MICROWAVE TROUBLESHOOTING#

Bosch Microwave Troubleshooting Series Microwave Troubleshooting

COOKING POTS WITH INTEGRATED HEATING ELEMENTS , MICROWAVE OVENS. Reset the household circuit breaker or replace any blown fuses.BSH BOSCH UND SIEMENS HAUSGERATE GMBH , 81669 MUNCHEN , FED REP GERMANY , FILED. Remove the plug from the outlet, wait 10 seconds, then plug the microwave in again. Properly insert the plug into a grounded power outlet. Neither the microwave’s display nor oven operates. Bosch 800 series, 500 series microwave troubleshooting.

A faulty door switch which is also often called as an interlock switch is the part which signals the other parts to turn. One of the possible reasons for microwave stopped working and no power could be an issue with the door switch. Problem with the door switch. If there is no continuity or there is visible burn marks on the switch we recommend to replace the switch.The following is a way to fix the problem of microwave stopped working, no power: 1. If there are no visible signs of damage then use a multimeter to test the switch for continuity.

Bosch Microwave Troubleshooting How To Use Your

If any buttons respond but some do not then replace the touchpad and control panel.If the door on your microwave oven doesn’t appear to close properly, you may have a problem with the door latch assembly. We additionally manage to pay for variant types and after that type of the books to browse.3 – Touchpad or Control Panel = Press each button on the control panel. If the components are working as designed and you find nothing else bad then replace the main control board.bosch-gas-cooktop-troubleshooting 1/2 Downloaded from optimus.test.freenode.net on Septemby guest eBooks Bosch Gas Cooktop Troubleshooting Right here, we have countless book bosch gas cooktop troubleshooting and collections to check out. There’s no easier way to fix problems than with Bosch technicians and our authorized service partners.2 – Main Control Board = Check all other parts first. Owner manuals provide valuable information on how to use your appliance.

Use a multimeter and test for continuity to see if it needs to be replaced.6 – Thermostat = Thermostat may be bad. The thermoprotector is a safety device to make sure the microwave does not overheat. If this part is bad, either throw your microwave away or hire an electrician to replace because of safety reasons.5 – Thermoprotector = When the microwave runs for a few seconds and stops then the thermoprotector may be tripped. DO NOT replace this yourself as it can hold large amounts of electricity even after being unplugged.

The wiring looked fine and everything was plugged in as it should be. There was no sign of a damaged capacitor on the board or any burn spots whatsoever. It then popped out and we looked at the control board and display panel. We removed the control panel by lifting UPWARDS on it.

The magnetron was possibly shorting the control board somehow? Once the magnetron was running, the microwave oven turned off.Instead of replacing parts one by one, we tried an experiment. The first 2 or 3 seconds was just a short waiting period before the microwave would actually start to cook. So we then tried a few things…We then thought that if the problem happens after 3 seconds, maybe it had something to do with when it started to actually microwave (cook). We then examined and tested the door switch with a multimeter and it tested good.

We put one foil filled bag near the top of the back of the main control board, and one foil filled anti-static bag near the bottom of the control board. We used 4 thick pieces of aluminum foil in each bag. We put a piece of aluminum foil in a computer style anti-static bag.

By adding a barrier to the back of the main control board, the issue was fixed and we did not have to replace a single part. Somehow RF was leaking from the magnetron and sending a frequency to the control board strong enough to reset it. We plugged in the microwave and tested it. We gently put the main control panel back in place and put the screw in to hold it in place.

If you try this and it fixes your microwave from shutting off, you should replace the magnetron in your microwave or buy a new microwave.Have other reasons or parts that could be causing a microwave to stop working after a few seconds? Please leave a comment below. We DO NOT recommend you do this as it is just meant as a test.